Duw Fix Chemicals

Application Method: Apply Bond Plus to the reverse side of the stone/marble/granite slab using a brush, and let it dry for 7-15 minutes. Then, apply adhesive to the surface where Bond Plus was applied, and immediately affix the stone/marble/granite slabs to the floors and walls. Allow it to dry. For optimal results, allow an acquisition period of 28 days under normal weather conditions. 

Area of Applications:

• Roof slabs and parapets
• Waterproofing for sunshades made of cement 
• Suitable for surface preparation and repairs in RCC
• Can serve as an exterior coating for PVC water tanks exposed to direct sunlight on roofs, balconies, etc., aiding in maintaining cooler water temperatures indoors. For added reinforcement, utilize glass fiber mesh on joints, drainpipes, corners, or any cracks.

Application:

• Start by applying a prime coat using a ratio of three parts Uniguard to one part water. 
• Follow with two coats of undiluted Uniguard. Apply the second coat at a 90-degree angle to the first coat. 
• Allow 4-6 hours between the two coats. 
• For optimal terrace results, apply Uniguard up to the parapet level, covering the entire roof.

Apply prime coat in the ratio of three part of Uniguard & one part of water apply two coats of duw fix without dilution second cota at 90 to first cota. duration between two coats should be 4-6 hours.for best result on terrace apply  to parapet level including entire roof.film thikness 340-360 microns  per coat minimum three coats recommended for optimum perfomance.

Apply prime coat in the ratio of three part of duw fix & part of water.apply two coats of duw fix without dilution second cota at 90 to first cota. duration between two coats should be 4-6 hours.for best result on terrace apply duw fix to parapet level including entire roof.film thikness 340-360 microns (DET) per coat minimum three coats recommended for optimum perfomance.